5 Mold Risks For Buildings In Dry Climates
Five Sources Of Moisture That Can Sustain Mold Growth
Mold requires moisture for growth. A dry outdoor climate does not necessarily mean that mold is not likely to flourish indoors under certain conditions. Any of these five sources of moisture can sustain black mold growth within a structure in Oneta, OK.
1. Air Conditioning
When it is hot outside, a building air conditioner may run constantly. The cooling coil, condensate drain pan and insulation in an AC cabinet or ductwork may develop mold without regular maintenance.
2. Bathroom Mold
Commercial bathroom facilities are another common location for mold cleanup. Supply lines that can leak or burst or drain lines that back up raise mold risks in these areas. Buildings with showers in addition to toilets may be more prone to mold.
3. Blocked Drainage
Blocked drain lines can cause mold to form in and around bathrooms as well as on the lowest level of a building. Backed-up toilets, bathroom drains and basement floor drains are the main culprits inside, while poor rain and runoff drainage outdoors can also raise mold risks.
4. Plumbing Leaks
Black mold may be prone to grow anywhere moisture is readily available. A slow leak can keep materials wet long enough that this potentially toxigenic species or other types of mold form. Shut off the water supply as soon as you notice a leak and contact a plumber.
5. Constant Condensation
Condensation may build up in a structure due to the difference between indoor and outdoor temperatures. Droplets may also form around pipes, water-based appliances or structural features and necessitate extensive mold remediation.
Any of these factors can support the growth of mold in a building in Oneta, OK, such as black mold. It is important to have air conditioning and plumbing systems inspected on a regular basis and keep bathrooms and other areas clean and dry to prevent or control a mold problem.